A broken garage door is a physical hazard for you and your family and provides easy access to burglars. Attempting to fix it yourself is risky because you might cause more damage or hurt yourself.
However, there are some minor repairs that you can do to keep your garage door working properly. Contact Garage Door Repair OKC now!
The tracks upon which your garage door rolls can become misaligned for various reasons. They might get knocked off course by a vehicle or hit by falling debris. Whether this happens once or repeatedly, it can cause the doors to move more slowly and unsteadily. This is a safety issue that should be addressed immediately.
Often, misaligned tracks can be corrected with regular inspections and simple DIY repair work. A few of the most important things to look for are visible gaps between the track and rollers, a lack of smooth movement, and the presence of any physical damage. Identifying these signs is essential to ensure the long-term health of your garage door and avoid potential problems down the road.
Checking the Tracks
Inspecting your garage door tracks regularly for any signs of damage or misalignment is important. To do this, loosen the mounting brackets and shift the tracks until they’re equidistant from the wall on both sides. A level can help determine whether the tracks are properly horizontal and vertical, and they can then be tightened. It’s also a good idea to regularly clean the tracks with a degreaser in order to remove any dirt, dust, or other debris that might hinder movement.
The most common reason for a misaligned track is simply age and wear and tear. Over time, the metal of the track may develop small dents or bends that can disrupt the movement of the door. This is especially true if the track is exposed to environmental factors such as extreme heat or cold, harsh winds, rain or sleet, or snow. In some cases, the tracks will need to be replaced entirely in order to restore proper function.
While it’s possible for homeowners to realign the tracks themselves, it’s generally a better idea to leave this job to the professionals. Professionals have the high-quality tools and equipment necessary to make precise adjustments that will ensure your garage door is safely and reliably functioning for years to come. In addition, they can do the job without voiding your warranty.
Broken Cables and Springs
The heavy-duty twisted cables that run from the springs to the bottom of your garage door are responsible for holding the tension and lifting the weight of the door. They can easily break if they’re not regularly inspected and replaced when needed. They can also fray from prolonged exposure to moisture or rust in rough spots on the cable drums.
When the cables break, it can send a jolt of energy through the torsion or extension springs. This is not only dangerous but can cause even more damage to these vital components. It is not uncommon for springs to snap in half from this kind of energy. It’s always best to consult with a professional for this type of repair.
If a broken cable is not properly replaced, it can put a lot of strain on other parts of the system, including the bearings that support the cables. This can cause the bearings to become defective and create squeaking sounds when the door operates. The bearings can also begin to emit a burning smell. This is a sign that the bearings are beginning to wear out and will need to be replaced.
Replacing the garage door cables isn’t an easy or cheap project. It involves removing the old cables, running new cables along the door opening and then winding them around the drums to secure them in place. It’s a job that requires knowledge, tools and safety equipment.
The first step is to remove the existing cables by inserting a winding bar into one of the holes on the winding cone and loosening each set screw with a 7/16″ universal socket. Once the wire is free, you can unwind it slowly and then wrap it around the bottom of the drum, using a vice grips to hold it in position. You can then reattach the end without the loop to the pin at the bottom of the door. Repeat this process on the other side of the garage door. It may be necessary to loosen the track to gain more room for this process.
Broken Bottom Seals
A garage door bottom seal creates a barrier that keeps out pests, moisture, and drafts. It also helps the garage and home stay at a more stable temperature, decreasing energy costs and keeping your belongings safe from moisture damage. If this unsung hero of the garage is broken, it’s important to get it replaced as soon as possible to prevent further deterioration.
Over time, a garage door bottom seal can lose its flexibility and ability to form a tight seal with the ground. This is typically due to age, sun exposure, and improper installation. Luckily, replacing it is a relatively easy DIY project. The key is to find a seal that’s compatible with your door and the condition of your garage floor. Once you have the right seal, it’s important to clean and lubricate it regularly to ensure a long lifespan.
Getting rid of a broken bottom seal will help keep moisture out of the garage, which is ideal for your belongings and can improve the overall comfort of the home. Gaps or cracks in the seal can allow moisture to seep in, which can damage items stored in the garage and even lead to mold and rot.
Replacing your garage door bottom seal can be done easily and at a low cost. However, it is important to note that this is not a project for the novice handyman. Before you do this on your own, consider contacting a professional. They’ll be able to inspect your garage door and determine whether it’s better to replace or repair the damaged panel.
Often, a replacement is the best option because it will provide longer-lasting results. In addition to the benefits mentioned above, a new seal can protect your belongings from unwanted pests and rodents that can damage and contaminate your living space. It can also be a great investment for your home’s energy efficiency, helping to lower your energy costs and keeping the garage and the rest of your home at a more consistent temperature.
Broken Weather Stripping
Weather stripping is an important part of your garage door and helps prevent drafts, energy loss, and moisture infiltration. Unfortunately, it’s also one of the most overlooked parts of a garage door, and many people fail to recognize signs that it’s time to replace it. A worn weather seal will allow cold air to enter your garage in the winter and warm air to escape, and it can also increase your energy bills.
A common sign that it’s time to replace your weather stripping is when it starts leaking or creating a gap between the garage door and the concrete floor. However, there are some other less obvious signs that your weather stripping is past its prime. If you notice that the rubber is dry and brittle, or that it has started to discolor, this is a surefire sign that it’s time to replace it.
Another way to check for deteriorating weather stripping is to perform the dollar bill test. Place a dollar bill between the jamb and the door, close the door, and see if you can pull it out easily. If it is easy to do, it’s time to replace the weather stripping.
Once you’ve determined that it is time to replace your weather stripping, the first step is to remove any existing material. This can be done by spraying the area with adhesive remover and using a putty knife to peel off as much of the old material as possible. Then you’ll need to measure the gap between the garage door and the jamb, and decide what type of weather stripping you want to install. There are a variety of options, including v-strips, foam, felt, and some door sweeps. Once you’ve chosen the type of weather stripping that you would like to use, it’s time to cut and install. Start with the long side strips, and then work your way down the rest of the door.
In addition to replacing weather stripping, you should also regularly clean the entire garage door to avoid moisture buildup. A regular cleaning will also help keep dust and dirt from causing damage to your door’s rubber components.